CGTFG - INK JET REPLACEMENT CARTRIDGE, RF40AF
- MSDS: CGTFG
- Manufacturer: NU KOTE INTERNATIONAL INC
- Product Name: INK JET REPLACEMENT CARTRIDGE, RF40AF
- National Stock Number: 7510-00N084454
Product Identification
Product ID:INK JET REPLACEMENT CARTRIDGE, RF40AF
MSDS Date:01/18/1995
FSC:7510
NIIN:00N084454
MSDS Number: CGTFG
Responsible Party
BARDSTOWN, KY 40004
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 800-448-1422
Cage: 79981
Contractor
Telephone: 800-448-1424 (UNISYS)
Cage: 79981
Ingredients
2-PYRROLIDINONE; (N-METHYL PYRROLIDONE)
CAS: 616-45-5
RTECS: UY5715000
OSHA PEL N/K
ACGIH TLV: N/K
1,4-BUTANEDIOL
CAS: 110-63-4
RTECS: EK0525000
OSHA PEL N/K
ACGIH TLV: N/K
WATER
CAS: 7732-18-5
RTECS: ZC0110000
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MAY CAUSE SLIGHT
IRRITATION, REDNESS AND BLURRED VISION. INGESTION: HARMFUL IF
SWALLOWED. SKIN: WILL CAUSE TEMPORARY DISCOLORATION. CHRONIC: NONE
SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: HARMFUL IF SWALLOWED, GET MEDICAL ATTENTION
IMMEDIATELY. INHAL: NOT APPLICABLE. REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYES: IMMEDIATELY
FLUSH W/PO TABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE
FROM MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .
Fire Fighting
Flash Point:140F,60C
Extinguishing Media:WET OR DRY EXTINGUISHER.
Fire Fighting Procedures:NONE. USE NIOSH APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH SKIN, EYES, AND
CLOTHING. WASH THOROUGHLY AFTER HANDLING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NOT APPLICABLE. USE NIOSH APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE. ANSI APPROVED EYE WASH & DELUGE SHOWER
.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.01 (WATER=1)
Solubility in Water:MISCIBLE
Appearance and Odor:PLASTIC CARTRIDGE CONTAINING BLACK AQUEOUS BASE
INK.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DISPOSED OF IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.